The Product
The QSC GX5 is a 500W per channel power amplifier in a 2U rack mounting chassis, ideal for professional entertainers who require maximum performance and portability but on a limited budget. The GX5 uses a class H system, based on key elements of the PLX Series, almost doubling power in the same size and weight. QSC design expertise allows the output devices to shift from low power to high power rails in less than a millionth of a second, ensuring that the output power is always right where it needs to be without excess loss.
The design uses a premium toroidal power transformer for reliable mid-weight performance and a variable-speed fan moves air crosswise through the amplifier, drawing cool air in over the power transformer, through the fan, and then over the heat sink. This keeps the transformer cool and allows a full size heat sink to fit in a smaller chassis. The amplifier is fully protected from the usual hazards of the trade, also employing the GuardRail protection electronics which permits delivery of full peak power while preventing detrimental overloads. During excessive clipping, or extreme overheating, GuardRail reduces gain just enough to preserve the integrity of the music, protecting the speakers and keeping the audience attention, without unprofessional distortion levels or shutdowns.
The GX5 also supports biamping and has an integral switchable crossover that splits the full range input entering channel 1, sending 20Hz - 100Hz to the sub output (channel 1), and 100Hz - 20kHz to the top box (channel 2). Audio inputs are balanced presented on both XLR and Jack connectors, and speaker outputs are available on either 4mm binding posts or combination Speakon Jack connectors. Mains power is applied via a standard IEC connector with a rear panel mounted circuit breaker protecting the incoming feed. The front panel has a pair of rotary input level controls with associated signal and clip LED indicators and a main power switch.
The Manufacturer
QSC was founded in 1968 by Barry Andrews and Pat Quilter in the heyday of Hendrix, Cream and acid rock. From fragile beginnings the last four decades has seen QSC Audio Products rise to become a globally recognised leader in professional audio. This prominence is the result of the company's mission to establish new standards of reliability and performance through the development of breakthrough technologies. QSC's products meet the demanding requirements of audio professionals in concert, installation, portable entertainment and cinema applications. The exceptionally high value of QSC products is achieved through developing leading technologies, world-class manufacturing techniques, and the purchasing power possible as the world's leading amplifier producer.
General
- frequency response 20 Hz - 20 kHz, +0, -1dB
- signal to noise ratio 100dB
- total harmonic distortion 8Ω less than 0.05%
- total harmonic distortion 4Ω less than 0.1%
- damping factor 100
- voltage gain @ 8Ω 34.4dB
- input connector unbalanced phono
- maximum input level unbalanced +24dB
- input impedance unbalanced >20kΩ
- input connector balanced ¼" and XLR
- maximum input level balanced +24dB
- input impedance balanced >20kΩ
- output connector speakon, ¼" Jack plug and binding post
- output power 500W @ 8Ω 1kHz both channels driven
- output power 700W @ 4Ω 1kHz both channels driven
- power requirements 220/240VAC
- dimensions 483mm W x 257mm D x 89mm H
- weight 12kg
Accessories Included
Power Cable
User Guide
Availability
This item is available in two to four days approximately.
Delivery cut off time
The cut-off time for ordering this product for next working day delivery, subject to stock availability, is 3.30pm UK time.
Shipping Costs
The delivery cost of shipping this product to a UK mainland delivery address is FREE of charge.
International Delivery Charges
For international shipping options and charges please see the Delivery Information page.