The Product

The Dynacord SUB 115 is a vented direct radiating subwoofer equipped with the high powered Electro-Voice EVS15S transducer. The new High Speed Laminar Vent system shows significantly less distortion and lower air noise at low frequencies than common vented cabinets. The SUB 115 has the same dimensions and cosmetics as the powered POWER SUB 315 and can directly be connected to deliver an extended bass response. It contains a passive filter that suppresses high frequencies and other cabinets in the series such as the D8 and D12 can be directly connected in parallel to the SUB 115 if an extended bass reproduction is required. Connection is simply made with a regular Speakon cable.

The cabinet is equipped with an electronic circuit called Voice Coil Tracking Protection and this circuit senses the terminal voltage of the transducer and simulates the thermal behaviour of the voice coil. In case of potential thermal overload the power applied to the speaker is reduced to a safe level. Extremely powerful amps can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The Voice Coil Tracking Protection exhibits 'soft' switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe level.

The SUB 115 cabinet is made of 18mm birch plywood and all corner joints and braces are grooved and glued. The cabinet surface is painted with a 2-K laquer finish and the acoustic foam front on a powder coated steel grille protects the SUB 115 against damage during transport and bad environmental conditions. The connector panel uses two 4 pole Speakon connectors giving an input and through patching point for a safe and simple connection, and easy daisy-chaining to other cabinets. A top mounted socket has been provided for pole mounting of mid/high cabinets, simplifying setup and additionally the cabinet is equipped with four large rubber feet and two handles for safe siting and transportation.

Priced and packed singularly.

The Manufacturer

Dynacord are part of Bosch Communications and are based in Straubing Germany. They manufacture a comprehensive range of professional audio equipment and, ongoing investment in sophisticated computers and advanced measuring electronics, have helped to place their designs very much in the spotlight. Dynacord products are designed and built with a typical German approach to robustness and technical excellence.

General

• frequency response 55Hz - 320Hz
• crossover frequency 124Hz
• power rating 400W RMS
• input connector Speakon
• nominal impedance 8Ω
• dimensions 464mm W x 660mm D x 601mm H
• weight 34kg

Accessories Included

User Guide

Availability

This item is available in three to ten days approximately.

Delivery cut off time

The cut-off time for ordering this product for next working day delivery, subject to stock availability, is 3.30pm UK time.

Shipping Costs

The delivery cost of shipping this product to a UK mainland delivery address is FREE of charge.

International Delivery Charges

For international shipping options and charges please see the Delivery Information page.