The Product
The DPA 4062FM is a prepolarized, very low sensitivity, omnidirectional miniature condenser microphone, beige in colour, with a 5.4 mm vertical diaphragm specially designed for maximum performance under the often difficult conditions when mounted directly on the body. Utmost attention has been paid to the microphone's resistance to humidity by employing a double vent protection system together with water resistant materials inside the microphone, allowing the microphone to operate reliably even in high-humidity situations. By changing the protection grids, the microphone can be acoustically modified according to the placement of the microphone on the body.
Specifications include an outstanding noise floor of 33 dB(A) reference 20 µPa and an impressive sensitivity of 1 mV/Pa and, if powered correctly, the microphone can handle sound pressure levels up to 154dB SPL before clipping occurs. A wide range of connection adapters are available making it compatible with virtually all professional wireless microphone systems available on the market today. It can also be used wired when used with a suitable powering adaptor such as the DPA MPS6001 phantom adaptor or the MOS6010 battery power supply. Also available in black.
Requires external power to function.
The Manufacturer
Although DPA has technically only been in existence since 1992, the company roots go back to the 1950s, drawing on the development, designs and experience of Brüel and Kjœr, from who DPA were born. The company has enjoyed tremendous growth becoming a world leader in the design and manufacturer of world-class miniature microphone technology. Their products are globally praised for their exceptional clarity and transparency, superb specifications, supreme reliability and, above all, pure, uncoloured and undistorted sound.
General
- transducer type condenser
- polar pattern omnidirectional
- frequency response 20Hz - 20kHz
- sensitivity 6mV/Pa (-44dB) ±3dB
- nominal impedance 30 - 40Ω
- signal to noise ratio 68dB(A)
- max sound pressure level 144dB
- self noise 26dB A-weighted
- power requirement 5V - 50V DC via interface
- cable length 1.8m
- connector MicroDot
- dimensions 13mm L
- weight 7.5g
Accessories Included
DUA6002 Miniature Grids, High Boost, Beige x 5
DUA6001 Miniature Grids, Soft Boost, Beige x 5
Availability
This item is available in two to four days approximately.
Delivery cut off time
The cut-off time for ordering this product for next working day delivery, subject to stock availability, is 3.30pm UK time.
Shipping Costs
The delivery cost of shipping this product to a UK mainland delivery address is FREE of charge.
International Delivery Charges
For international shipping options and charges please see the Delivery Information page.
